Tilted photovoltaic bracket system
加载中...

Tilted photovoltaic bracket system

HUGE inclined photovoltaic bracket system is suitable for flat terrain and various uneven slopes, with strong wind and snow resistance. System stability, large-span design, minimal installation components, and low cost. Adjustable angles from east, west, north, and south, suitable for various inclined terrain. By using a pile driver to drive the foundation into the ground, construction is simple and installation efficiency is high.

  • Material:

    Q235 / Q355 / S350GD
  • Design Standard:

  • Foundation Type:

  • Regulation mode:

  • Adjustable Angle:

  • Wind Load:

    ≤ 60 m/s,Per Local codes
  • Snow Load:

    2.4KN/M²,Per Local codes
  • Module Type:

  • Panel Layout:

  • Service life:

    ≥ 25 Years
  • Warranty:

    15 Years
  • Installation Site:

  • Fastener:

  • Small Components:

  • Tile Angle:

    5~45 °
  • Galvanized Thickness:

  • Max. span:

  • Waterproof design:

  • Tracking Range:

  • Operation Temperature:

  • Windproof Leveling:

  • Protection Degree:

  • Compatible Modules:

  • Bifacial Compatibility:

  • Installation Angle:

  • Clearance Height:

  • Load-Bearing:

  • Fixed way:

  • Roof Slope:

  • Building Height:

  • Model No.:

Inquiry now
Product Detail

Tilted photovoltaic bracket system
HUGE inclined photovoltaic bracket system is suitable for flat terrain and various uneven slopes, with strong wind and snow resistance. System stability, large-span design, minimal installation components, and low cost. Adjustable angles from east, west, north, and south, suitable for various inclined terrain. By using a pile driver to drive the foundation into the ground, construction is simple and installation efficiency is high.

Tilt Angle: 5~45 °
Snow Load: 3.6KN/m^2
Wind Speed: 60m/s
Main Material:  Q235 / Q355 / S350GD
Surface Treatment: Anodized (Aluminum) and Galvanized (Steel)
Warranty: 15 years

Tilted photovoltaic bracket system

Feature
- Can handle tilting of things
Rotating metal parts can effectively solve the problem of ground tilt.
- Can cope with north-south tilt
Adjust the height difference between the north and south ground according to the length of the pile, and coordinate with the rotating metal parts
Suitable for complex foundations.
- Save construction time and costs
The angles of east-west and north-south directions can be adjusted according to local requirements. Implement installation simplicity
Simplify and maximize power generation efficiency.

Tilted photovoltaic bracket system

Project Case
Tilted photovoltaic bracket system
Tilted photovoltaic bracket system

A Free Consultation

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products
Building-Integrated Photovoltaics (BIPV) System
Building-Integrated Photovoltaics (BIPV) System

Building-integrated photovoltaic (BIPV) systems have dual-purposes: They serve as both the outer layer of a structure and electricity generation for off-grid or on-grid. BIPV systems save construction material costs and electricity costs, reduce pollution.

Ballast PV System
HDPE Water Ballast

All-round solution for flat roofs and floors Integrated design: great help to quick and easy installation amd reduce costs for installation, operation and maintenance. Proprietary material formula: resistant to aging, moisture, heat, and corrosion at extrem weather, ensuring long-term durability. Material testing: undergoes rigorous weather resistance testing, guaranteeing 25-year service life and 15-year product warranty. Reinforced structural design: enhanced connector design ensures strong wind resistance to provide added stability. Special Precaution: serve as a backup water source for fire extinguishing as an additional safety measure in case of fire.

Pole Ground Solar Mounting System
Pole Ground Solar Mounting System

The Pole Ground Solar Mounting System, featuring a Basic Span Single Ramming Pile Type design, is a largely pre-assembled ground mounting solution. It is aptly suited for the deployment of large commercial and utility-scale solar photovoltaic projects. Fabricated from superior-grade aluminum, this solar mounting system boasts impressive resistance to corrosion. Its patented single-pile structural design not only reduces installation time and expense, with good compatibility to varied solar modules.

Floating Mounting System
Floating Mounting System

Floating mounting system is applied to solar PV power plant installation on water. Adopting HDPE material, it has passed the Hunt Water Absorption Test, Anti-Aging Test, Anti-UV Test, etc. Moreover, it can bear the pulling force that is much higher than other products. Adopting new module design in floater and main floater, it enables the array of double row in the same facing or in symmetrical facing and increases the efficiency of solar power generation and installation capacity. Moreover, it can be easily installed and saves the cost.

TiltUp Vento System
TiltUp Vento System

Triangular mounting brackets can easily apply to different flat roofs or open terrains since it has variable tilt angle and footing options for both roof clamp and roof penetration. Elevation can be used as fixed tilt or adjustable tilt, allowing project-specific adjustments and optimizing solar power output. The innovative high pre-assembly design eliminates on-site cutting and welding and enables quick and easy PV module installation.

Flexible Solar Panel Mounting System
Flexible Solar Panel Mounting System

Huge Energy Flexible Solar Mounting System has three major advantages: high clearance, large span and high safety. It effectively addresses the issues of land occupation, limited reuse, and high construction costs associated with traditional solar mounts. It can better assist the comprehensive reuse of land and promote the application and popularization of comprehensive "PV +" projects, such as agricultural PV, forest PV, fishery PV and pastoral PV.

Hot Dip Galvanized Steel Solar Mounting System
Hot Dip Galvanized Steel Solar Mounting System

Steel ground solar mounting system is a reliable and cost-effective solution for installing solar panels on the ground. It consists of sturdy steel structures that securely support the solar panels while withstanding extreme weather such as wind and snow. The piles are varied, allowing for customized installation on various types of terrain. With excellent durability and structural stability, steel ground mounting systems are widely used in both commercial and utility-scale solar projects.

Ballast PV System
Ballast Support for Flat Surface

Quick and easy assembly of the photovoltaic panels by means of snap-fitted universal clamps with channelled profile embedded in the ballast. Proprietary material formula: resistant to aging, moisture, heat, and corrosion at extrem weather, ensuring long-term durability. Versatility of each block for mounting the modules in both horizontal and vertical orientation.

Leave a message

Leave a message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About Us

contact

top