FIT price for FY2020 officially decided, major changes in solar market such as "regional utilization requirements" The Ministry of Economy, Trade and Industry has announced the purchase price and levy unit price of the renewable energy fixed price purchase system (FIT) in FY2020. The levy unit price borne by consumers increased by 0.03 yen from FY2019 to 2.98 yen / kWh, and a new certification system such as "regional utilization requirements" has been established. On March 23, 2020, the Ministry of Economy, Trade and Industry announced the purchase price and levy unit price of the renewable energy fixed price purchase system (FIT) for FY2020. The levy unit price borne by customers will increase by 0.03 yen from FY2019 to 2.98 yen / kWh. In the case of an average model home (260kWh of monthly power consumption), the cost will be 774 yen per month and 9288 yen per year. Compared to FY2019, the annual burden was 84 yen, and the monthly burden was 7 yen. New certification conditions such as "regional utilization requirements" The purchase price of commercial solar power in FY2020 is 13 yen / kWh for 10kW or more and less than 50kW, 12 yen / kWh for 50kW or more and less than 250kW, and the price is determined by the bidding system for 250kW or more. The target of the bidding system has been expanded from 500kW or more so far. Furthermore, the so-called small-scale business photovoltaic power generation of 10 kW or more and less than 50 kW is a requirement for FIT certification, "self-consumption type local utilization requirements", such as being available for self-consumption type at the time of disaster Set. Only surplus electricity is purchased by FIT. On the other hand, the FIT system has virtually ended the support for the field-type business of selling all electric power. The self-consumption rate of 30% or more is required for the small-scale solar power generation to be recognized as a requirement for regional use. Furthermore, a self-sustaining operation function in the event of a power failure is also required. Of the small-scale business solar power, in the case of farming-type solar power generation (solar sharing) that has been approved for the temporary conversion of farmland, even if it is a project that does not consume its own, it has an independent operation function. If so, it is certified as meeting regional utilization requirements. The purchase price of residential solar power generation is 21 yen / kWh. The same JPY 24 / kWh as in FY2019 will be applied to biomass power generation using general wood of less than 10,000 kW. The purchase price of 10,000 kW or more and biomass liquid fuel (all sizes) will be decided by the bidding system. For wind power generation, 18 yen / kWh, which is 1 yen down from FY2019, will be applied for newly installed projects. Other replacement projects and floating offshore wind power were 16 yen / kWh and 36 yen / kWh, respectively, and were left unchanged from FY2019. Landing-type offshore wind po...

Summarizing the past and looking to the future, 2019 come to the end on schedule. Everyone spent a happy night in laughter, and we will continue to work hard and move forward in 2020.

After a hard work, we had a delicious dinner and everyone was very happy.

Japanese customers come to visit the factory 2019.10.19

Energy PV Taiwan 2019.10.16-2019.10.18 Taiwan Huge Energy Technology Co., Ltd. Address: 12th Floor, No. 43, Jianping 17th Street, Anping District, Tainan City

Exhibition "EXPO" of Tokyo, Japan 2019.9.25-9.27

Solar energy exhibition at the KINTEX Pavilion in Gaoyang, Korea Xiamen Huge Energy Technology Co., Ltd., participated in the solar energy exhibition at the KINTEX Pavilion in Gaoyang, Korea on June 19-21, 2019, booth number F86. A group of 5 people arrived in Korea on the 17th, and the 18th exhibition, 19-21 received a number of customers from South Korea engaged in solar-related industries, such as traders, producers, etc., busy on site, harvesting customer attention and recognition for follow-up Business development opens the market. Our company will continue to work hard to increase development efforts and actively explore the Korean market and other international markets.

Photovoltaic power station to fight against storm Release time: 2017-11-09 In order to resist natural disasters, it is necessary to control the location, design and installation of photovoltaic power stations. After the completion of the construction of the power station, how to effectively prevent natural disasters, the role played by the later operation and maintenance can not be underestimated, the above steps can be described as interlocking and indispensable. Therefore, in the storm-prone area, the following four points should be done to build a distributed photovoltaic power station: I. Site selection: ensuring the quality of the building Any building must be designed with safety in mind. In the past, building materials were often heavy, and the design was mainly based on support capacity and prevention of earthquake risks. In recent years, with the advent of lightweight materials, the risk of these building materials being blown away by the wind is also considered in design, preventing the roof from being torn by the airflow. At present, household distributed photovoltaic power plants are mainly installed on inclined roofs and flat roofs. The flat roof covers concrete flat roof, color steel flat roof, steel flat roof, ball joint roof and so on. There are also some places to pay attention to the installation location of the PV power plant. It is necessary to consider the installation location, installation orientation, installation angle, load requirements, and arrangement and spacing. From this point of view, the location of the photovoltaic power station can not be determined by a single finger. Mounting components on a beveled roof Second, the design: improve the strength of the component, design the appropriate windshield From the perspective of component materials, the choice of component backplane, frame material, and package glass can be considered to improve the anti-impact and anti-seismic properties of the components for specific climate environments, thereby improving the ability to withstand special situations. From the perspective of power plant design, while weighing the cost of photovoltaic power station and power generation, the strength design requirements of photovoltaic supports and component clamps can be appropriately increased, and the inclination of components with better wind resistance can be reasonably selected. In addition, consider designing a suitable windshield. The wind deflector is fixedly mounted on the rear pillar of the bracket system, and the panel is provided with a plurality of air guiding ports, which have the functions of guiding the flow and reducing the wind pressure of the assembly. The beam of the bracket system is reduced in force, the pulling force of the foundation is reduced, and the safety factor of the photovoltaic power station structure is improved. However, the force on the rear pillar is increased, and the axial shear force of the foundation is increased. The foundation force is checked....