Ground Screw Supplier,Ground Screw Manufacturer

Ground Screw

Ground screw pile is a new type of pile foundation material, which has incomparable superiority advantage compared with traditional ground pile. The patented design is screwed into the ground to replace the concrete independent foundation and strip foundation. The top of ground screw pile is connected with the load. The construction is not restricted by geological condition, construction efficiency, does not damage the environment, and it has more advantages of environmental protection. It can still be constructed even under severe cold weather conditions, It can facilitate migration and recycling. solar ground screw pile is not only a single product, but also includes a complete set of implementation solutions such as construction qualification, rich construction experience and management of technicians to ensure maximum service life.

Material:

Q235

Service life:

25 years

Warranty:

20 years

Tile Roof Solar Mounting System

Roof hooks are applied to many different tiles such as pantile, Roman tile, slate, clay tile, etc. Adjustable hooks can be adjusted horizontally and vertically.

MAG 60W Foldable Solar Charger ( Integrated Structural Design )

60W Portable Solar Panel for Power Station, 20.8V Foldable Solar Charger with Mc4/DC5521/Anderson/XT60 Cable & USB/Type-C port Outputs, 23% High Efficiency IP65 Waterproof 2 Kickstands for Outdoor Camping RV Trip.

Vertical Panel Mounting System

Dual-use in land for both agriculture and energy production can improve land use efficiency and increase crop production by over 30%. And it can provide an additional source of income for farmers, making it a financially attractive option.

Metal Roof Solar Mounting System-2

The Metal Roof Solar brackets are suitable for roofing with corrugated sheet metal, or trapezoidal metal sheet. A Hanger bolt is available for the foot option, making the installation more convenient, competitive, and reliable. The systems fully comply with the Australian and other international standards on wind & snow load, making it suitable for a wide variety of climatic zones.

Hot Dip Galvanized Steel Solar Mounting System

Steel ground solar mounting system is a reliable and cost-effective solution for installing solar panels on the ground. It consists of sturdy steel structures that securely support the solar panels while withstanding extreme weather such as wind and snow. The piles are varied, allowing for customized installation on various types of terrain. With excellent durability and structural stability, steel ground mounting systems are widely used in both commercial and utility-scale solar projects.

Adjust Ground Solar Panel Structure

The Adjust Ground Solar Panel Structure is designed for increasing power generation by angle settings according to season changing. It can achieve different angle cover N-S 10'-60 through manual or with electric motor. Carbon steel is adopted as the main material for structure to ensure the whole stability.

MAG 60W Foldable Solar Charger ( Stitched Version )

60W Portable Solar Panel for Power Station, 20.8V Foldable Solar Charger with DC5521 Cable & USB/Type-C port Outputs, 23% High Efficiency IP65 Waterproof 2 Kickstands for Outdoor Camping RV Trip.

Tilted photovoltaic bracket system

HUGE inclined photovoltaic bracket system is suitable for flat terrain and various uneven slopes, with strong wind and snow resistance. System stability, large-span design, minimal installation components, and low cost. Adjustable angles from east, west, north, and south, suitable for various inclined terrain. By using a pile driver to drive the foundation into the ground, construction is simple and installation efficiency is high.

Thickness 3.1-4.0mm Ground Screw
Part No	Specificalion	Customized Design Service	Material
10-761230-C	T3Φ761200mm	Provide the ground screw as per instaiiation geological condition following customers' required length diameter, thickness,thickness of thread , shape of flange and size.	Hot-dip Galvanized Steel Q235
10-761630-C	T3Φ761600mm
10-763030-C	T3Φ763000mm

Thickness 3.1-4.0mm Four Blade Spiral Pile
Part No	Specificalion	Customized Design Service	Material
10-761230-C	T3Φ761200mm	Provide the ground screw as per instaiiation geological condition following customers' required length diameter, thickness,thickness of thread , shape of flange and size.	Hot-dip Galvanized Steel Q235
10-761230-C	T3Φ761600mm
10-761230-C	T3Φ763000mm

Thickness 3.1-4.0mm Adjustable Spiral Pile
Part No	Specificalion	Customized Design Service	Material
10-761230	T3Φ761200mm	Provide the ground screw as per instaiiation geological condition following customers' required length diameter, thickness,thickness of thread , shape of flange and size.	Hot-dip Galvanized Steel Q235
10-761630	T3Φ761600mm
10-763030	T3Φ763000mm

Thickness 3.1-4.0mm Ground Screw Without Thread
Part No	Specificalion	Customized Design Service	Material
10-W481230	T3Φ481200mm	Provide the ground screw as per instaiiation geological condition following customers' required length diameter, thickness,thickness of thread , shape of flange and size.	Hot-dip Galvanized Steel Q235
10-W481530	T3Φ481500mm
10-W483030	T3Φ483000mm

Thickness 3.1-4.0mm Ground Screw With Flange
Part No	Specificalion	Customized Design Service	Material
10-761230	T8Φ761200mm	Provide the ground screw as per instaiiation geological condition following customers' required length diameter, thickness,thickness of thread , shape of flange and size.	Hot-dip Galvanized Steel Q235
10-761630	T8Φ761500mm
10-763030	T8Φ763000mm

what are you looking for?

Others

Ground Screw

Ground Screw